ITEM AC76

Commercial grade .30 cal. carbide bullet single or dual stage resizing die for use in Hornady or RCBS ammo Master Press or any press that will take a 1-1/2 - 12 TPI thread (same thread as .50 BMG dies and presses. ( 7/8 x 14 thread for smaller presses will be available in the future.)

Each set has one .309 sizing die and one .3079 sizing die and a high grade tool steel pusher.

To size .310 - .311 bullets use the .309 resizing die first and then use the .3079 second. The finished bullet will be .308 diameter. (.3079 resizing die was made to compensate for jacket springback)

To size .30 cal. bullets with pull or cut marks, the .3079 die can be used in one stage for proper .308 diameter.

Specs.

1-1/2  - 12 TPI thread.

Steel body with hardened steel guide and carbide steel sizing insert, diamond ground polished finish. The hardened steel insert guides the bullet, aligns it into the carbide sizing insert.

Pusher is made of high grade tool steel which will insert into shell holder slot.

With proper care this resizing die could last many years, similar dies have been known to properly size several 100,000 tips.

Bullets should be clean before sizing and proper sizing lube or wax should be used.

TEMP SOLD OUT

per set /$300.00 + sh.

Call for single die prices and 7/8 x 14 die prices.